مستشعر حركة السيارة لنظام التحكم الذكي في ضوء الشارع

وفقًا لبيئة الطريق / النفق , ، فهي تتعاون مع وحدة التحكم المركزية في الإضاءة الذكية للتحكم تلقائيًا في إضاءة المصابيح وفقًا لتغيير السطوع البيئي , لتحقيق الغرض من الإدارة والتحكم الذكي .

According to the real time traffic flow rate conditions, it cooperates with the intelligent lighting centralized controller to automatically control the illuminance of the roadway lights according to the changing of city roads brightness, to achieve the purpose of intelligent public lighting management.

Key Features n Applicable to signal control systems, traffic information service systems, road traffic monitoring and other application scenarios. n High precision millimeter wave radar with 4 million low illumination camera. n Max. 8 lanes of multi-target motor vehicles detection, longitudinal distance of 100m. n High spatial resolution and strong penetration ability, support working in all-weather environment, not affected by rain, fog, strong wind, dust, light, etc. n Built-in deep learning algorithm, support intelligent recognition function, support license plate recognition and target fully structured. n Supports detection of multiple targets’ position, lane, speed, direction and other info. n It supports lane statistics, traffic flow, speed, status, queue, time distance, spacing, Qty.of parking areas, avg.delay, space occupancy and time occupancy data, and supports statistical upload from 1 to 3600 seconds. n Supports traffic evaluation data output, including congestion, queue length, etc. n Each lane supports 2 virtual coils to output vehicle entry and exit signals, the virtual coil positions are configurable. n Fog penetration, strong light suppression, wide dynamic range, and has multiple white balance modes to suit various scene requirements. n Support Network & RS-485 data upload. Parameters Millimeter Wave Radar Target Type People / Motor Vehicles / Non-Motor Vehicles Max. Qty. of Detection 128 Working Frequency 80 ~ 81GHz Transmit power 12dBm(RFout)+18dB(ANTgain) Speed Detect Range -250 km/h ~ 250 km/h Detection Mode Doppler moving target detection, slow moving target detection, fast moving target detection Sweep bandwidth 136.5 MHz Modulation Waveform FMCW Max. Detection Distance 150m@0° ;    50m@士45° Horizontal angle measurement range 士45° Horizontal lobe 90° for MRR, 22° for  LRR Vertical Lobe 13°(-6dB) Refresh rate 12.5Hz Install Height 1~ 6m   Interface Serial Port 1 of RS-485 Port Snapshot Function Image Format JPEG Image resolution 2688 × 1520 Smart Functions Intelligent recognition Bayonet capture, license plate recognition, vehicle model recognition, vehicle body color recognition, brand, sub-brand. Exterior Interface Ethernet 2pcs RJ45 100 M / 1000 M Adaptive Ethernet port  Warning 1 Relay switch Function Features Min.illumination Colorful: 0.01 Lux @ (F1.2，AGC ON) Black & White: 0.001 Lux @ (F1.2，AGC ON) shutter 1/25s ~ 1/100,000s Video compression standards H.264, H.265, MJPEG Compression output bit rate 32 Kbps ~ 16 Mbps Video resolution 2688 × 1520 Frame rate 25 fps (2688 × 1520) Image Settings Saturation, brightness, contrast, white balance, gain adjustable through software Storage function TF General functions Heartbeat, password protection, NTP time synchronization Video format PAL General Specifications Dimmensions 226 mm (W) x 375.3 mm (H) x 206.4 mm (D) Working Temperature -30 °C ~ +70 °C Working Humidity 5% ~ 95% @ 40 °C，No condensation Working Voltage DC 24 V ± 10% Power Consumption 25 W Max. N.W. 3 kg ICR Type Infrared IP Rating IP67 Focal Length 12 mm Resolution 2688 × 1520 White Balance Automatic white balance Wide dynamic range Support Max. Energy Optimization achieving by the Smart Traffic Radar  and Video all-in-one Detecting Machine 

SOWIN GXEC traffic enforcement flash tube supplier route is built for speed camera xenon tube OEM, tender safe flash tube, global traffic camera repair, traffic enforcement spare parts, and evidence camera flash supplier programs where procurement teams need controlled wording, document support, field-risk logic, and repeatable sourcing discipline. The replacement must survive engineering review, consultant questions, compliance screening, sample approval, and real service feedback after the order leaves the purchasing desk. Replacement approval must be based on geometry, trigger coupling, pulse energy, optical field, duty cycle, environmental margin, and sample image behavior, not a first flash or appearance match. For Middle East and other harsh roadside programs across high heat, dust exposure, humidity, vibration, and cold-start regions, SOWIN supports batch enforcement-camera flash tube review routes with stable field behavior proven through repeated roadside use. Serious approval should be judged by high-heat output stability, dust exposure endurance, cold-start confidence, trigger reliability, reflector fit, and license-plate readability before scale procurement. Multiple tube geometries and material routes can be reviewed for fixed speed cameras, mobile enforcement systems, ANPR lanes, red-light cameras, legacy repair benches, OEM modules, and tender-driven spare-part programs. SOWIN can provide an engineer-reviewed parameter sheet, sample-matching checklist, Spec PDF support, and RoHS documentation. The goal is to help OEMs, integrators, repair teams, and procurement officers choose an enforcement flash route by evidence behavior, field-risk control, and repeatable roadside service logic - not by appearance alone.

الخزانة الذكية هي حل تحكم رئيسي لمشاريع إنارة الشوارع LED للمدن الذكية . سوف تتحكم بشكل متزامن وتراقب الشبكة وإضاءة الشوارع في وقت واحد , الربط على نطاق واسع بأجهزة الطرف الثالث مثل عداد الطاقة , مستشعر التيار ثلاثي الطور , واقي الجهد الزائد , مستشعر الإضاءة , ومستشعر الحركة وما إلى ذلك . يمكنك مراقبة جميع خزانات إنارة الشوارع والتحكم فيها في أي جزء من العالم طالما يوجد إنترنت . من خلال الاتصال بمستشعر الحركة ومستشعر اكتشاف شدة ضوء النهار , سيوفر حلاً مثاليًا وسلسًا لنظام إدارة التحكم الذكي في الإضاءة على الإدارة الفعالة لأصول الطاقة في طرق المدينة , الطرق السريعة , الأنفاق , المستودعات , المصانع , المباني , المحطات الفرعية , مشاريع إضاءة المطارات . خيارات ربط حساس الطرف الثالث . يمكن أن يكون العنصر الرئيسي لملف PDF الخاص بوحدة التحكم المركزية تنزيل ما يلي:

وفقًا لبيئة الطريق / النفق , ، فهي تتعاون مع وحدة التحكم المركزية في الإضاءة الذكية للتحكم تلقائيًا في إضاءة المصابيح وفقًا لتغيير السطوع البيئي , لتحقيق الغرض من الإدارة والتحكم الذكي .

SOWIN Studio Flash Xenon Tube for Professional Photography is an engineering-grade pulsed light source built for studio flash tube replacement, flash head replacement tube review, camera flash tube replacement, and rental studio flash repair. The real requirement is not simply "it flashes." A serious replacement must return the flash head to repeatable photographic use with stable peak output, controlled trigger response, believable color behavior, and predictable service confidence across real shooting workflows. Key Engineering Targets Peak Intensity - supports crisp freeze-frame clarity, high-contrast product imaging, and stable studio exposure. Fast Discharge Timing - supports microsecond-class exposure control for motion stop and clean flash behavior. Stable Spectrum - helps maintain consistent color and repeatable output across sessions, rental use, and repair cycles. Defined Duty Window - verifies energy, flash frequency, and repetition range to protect service life under demanding cycles. Geometry Matching - supports linear, U-shaped, spiral, and ring designs for different reflector cavities, optical paths, and flash head structures. For safer integration, SOWIN recommends verified matching by arc length, glass OD, tube shape, electrode position, trigger coupling, flash energy, and duty window. Optional German-imported QUARTZ or SCHOTT glass routes can be reviewed for premium studio flash projects that require stronger thermal-load tolerance, cleaner optical behavior, and reduced blackening risk. Sign-off rule: Do not replace by appearance. A correct professional photography flash tube must be approved by geometry, trigger method, verified energy/frequency window, and real application duty. This prevents "works today, fails later" problems such as misfire, output drift, color instability, early blackening, and repeated repair-bench complaints.

SOWIN GXEC packaging line strobe tube is built for printing stroboscope flash tube, register drift strobe lamp, print rhythm xenon tube, web inspection strobe tube, and Drello 2500 3000 strobe tube service contexts where the replacement must protect register visibility, print rhythm, repeated flash timing, optical contrast, and stable inspection confidence on live production lines. Replacement approval must be based on geometry, trigger coupling, pulse energy, optical field, duty cycle, environmental margin, and timing-output behavior, not a first flash or appearance match. For inspection, printing, packaging, RPM, textile, web, portable maintenance, and legacy stroboscope programs across heat, dust exposure, vibration, production duty, and repeated service cycles, SOWIN supports flash tube review routes with field-risk control and repeatable service logic. Serious approval should be judged by trigger reliability, reflector fit, optical contrast, timing behavior, and motion-freeze confidence before scale procurement. Multiple tube geometries and material routes can be reviewed for industrial stroboscopes, printing lines, packaging inspection, textile and web inspection, portable service tools, legacy repair benches, and tender-driven spare-part programs. Optional German-imported QUARTZ or SCHOTT glass routes can be reviewed when stronger thermal-load tolerance and reduced blackening risk are needed. The goal is to help OEMs, integrators, repair teams, distributors, and procurement officers choose a stroboscope flash route by timing visibility, motion-freeze control, and repeatable service performance - not by appearance alone.